Sharing is Caring.

Share on Facebook Share on Twitter
Related Posts with Thumbnails

Change IP Address



How to change your IP address in less than a minute? The following trick gives you a step-by-step procedure to change your IP address.

1. Click on “Start” in the bottom left hand corner of screen.

2. Click on “Run”.

3. Type in “command” and hit ok.You should now be at an MSDOS prompt screen.

4. Type “ipconfig /release” just like that, and hit “enter”.

5. Type “exit” and leave the prompt.

6. Right-click on “Network Places” or “My Network Places” on your desktop.

7. Click on “properties”.

You should now be on a screen with something titled “Local Area Connection”, or something close to that.

8. Right click on “Local Area Connection” and click “properties”.

9. Double-click on the “Internet Protocol (TCP/IP)” from the list under the “General” tab.

10. Click on “Use the following IP address” under the “General” tab.

11. Create an IP address (It doesn’t matter what it is. I just type 1 and 2 until i fill the area up).

12. Press “Tab” and it should automatically fill in the “Subnet Mask” section with default numbers.

13. Hit the “Ok” button here.

14. Hit the “Ok” button again.You should now be back to the “Local Area Connection” screen.

15. Right-click back on “Local Area Connection” and go to properties again.

16. Go back to the “TCP/IP” settings.

17. This time, select “Obtain an IP address automatically”.

18. Hit “Ok”.

19. Hit “Ok” again.

20. You now have a new IP address.

Some ISPs do not support this type of procedure and hence there are chances of getting back the same old IP address even after trying this hack.In this case you need to switch off the modem and then switch it on to get the new IP address.

NOTE: All these tricks works only if you have a dynamic IP address.But if you have a static IP address you have no option to change your IP.

Posted in , , ,

18 comments

Hack/Alter Windows Vista Base Score



If you are a Windows Vista user then you are very likely to be familiar with the Base Score.This score is calculated based on the computer’s hardware and software configuration.This score act’s as a rating to your PC.If you have a too low base score then don’t worry.Hacking Windows Vista’s so called Base Score is very easy.It is possible to hack this score within no time.Here are the snapshots of my own system.Actually my system’s base score is 3.7.But I have brought it up to 9.5 with this small hack.Can you beleive this!!

Here is a step-by-step instruction to hack Vista Base score

1. Navigate to C:\Windows\Performance\WinSAT\DataStore

2. You should see a .xml file with Assessment (Formal).WinSAT as filename

3. Right-click it and select open with ‘Wordpad’ (Not notepad!)

4. On line 12, you should see something like the following:
9.5
9.5
9.5
9.5
5.5
9.5
9.5
9.5

5. You can enter any number in the place where I have written 9.5.But the number should be less than10.

6. Once you have entered the number of your choice save the file and close it.

7. That’s it.You have successfully altered your Windows Vista base score.No restart is required.

Posted in , , ,

21 comments

What are IP Addresses


An IP address (Internet Protocol address) is a unique address that certain electronic devices currently use in order to identify and communicate with each other on a computer network utilizing the Internet Protocol standard (IP)—in simpler terms, a computer address. Any participating network device—including routers, switches, computers, infrastructure servers (e.g., NTP, DNS, DHCP, SNMP, etc.), printers, Internet fax machines, and some telephones—can have its own address that is unique within the scope of the specific network. Some IP addresses are intended to be unique within the scope of the global Internet, while others need to be unique only within the scope of an enterprise.
The IP address acts as a locator for one IP device to find another and interact with it. It is not intended, however, to act as an identifier that always uniquely identifies a particular device. In current practice, an IP address is less likely to be an identifier, due to technologies such as Dynamic assignment and Network address translation.

Posted in , , , , , , ,

20 comments

Hacking Yahoo Messenger



This tutorial will tell you how to hack yahoo messenger while you are engaged in chatting with some person.While you are chatting through yahoo messenger, Yahoo will hide the IP addresses of all the computers that are connected through the yahoo messenger application to the chat room.So it is not possible to directly find out the IP of the person you want to hack.Then how to get the IP address? Yes it is still possible to hack the IP address during the Yahoo messenger chat.The procedure to Hack Yahoo messenger is discussed in detail below.

While you are chatting via yahoo messenger the communication between you and the person you want to hack, takes place indirectly via Yahoo server and not directly.It is not possible to hack Yahoo messenger directly to get the IP address.So to hack his IP, you must establish a direct communication with him.So,how to do this? It’s easy.Just start chatting with some one via Yahoo messenger.During the process of chatting send him a big file.Now the file transfer takes place directly between your computer and the victim’s computer(via yahoo messenger application).So now, you are ready to go. Here’s the step-by-step process to hack Yahoo messenger and get the IP address of the person .

  • Goto the COMMAND PROMPT (START>>>RUN>>>Type CMD).
  • Here Type “netstat -n” (without quotes).

NOTE: If you are new to “netstat” and other IP related commands refer this tutorial:Windows XP IP Utilities

  • The pic given below shows netstat results of my computer.I was not chatting when i took this pic and hence it looks modified.

  • Here local address is your own IP and the foreign address is the IP address of the recipient with whom you are connected via yahoo messenger (There may be multiple recipients and hence multiple foreign addresses).
  • Now send him the file.
  • Check the output by typing the command “netstat -n” (without quotes).
  • Assume the output is something like this.

TCP 127.0.0.10:5101 124.55.23.11:1246 ESTABLISHED

Here 124.55.23.11 is the IP address of the person with whom you are chatting and 1246 is the port number where connection is established.That’s It! You have now hacked Yahoo messenger to get his IP address.

Once you hack Yahoo messenger and get his IP address you can use any of the Remote Administration tools or perform NETBIOS HACKING.Refer this tutorial on Netbios Hacking.

NOTE: Some times there are chances where in the file transfer gets encrypted (takes place via yahoo server itself).So in this case the above hack may fail to work.

Posted in , , , ,

22 comments

Netbios Hacking


Submitted by Srikanth on Friday, 14 December 200759 Comments

THIS NETBIOS HACKING GUIDE WILL TELL YOU ABOUT HACKING REMOTE COMPUTER AND GAINING ACCESS TO IT’S HARD-DISK OR PRINTER.NETBIOS HACK IS THE EASIEST WAY TO BREAK INTO A REMOTE COMPUTER.

STEP-BY-STEP NETBIOS HACKING PROCEDURE

1.Open command prompt

2. In the command prompt use the “net view” command
( OR YOU CAN ALSO USE “NB Scanner” OPTION IN “IP-TOOLS” SOFTWARE BY ENTERING RANGE OF IP ADDRESSS.BY THIS METHOD YOU CAN SCAN NUMBER OF COMPUTERS AT A TIME).

Example: C:\>net view \\219.64.55.112

The above is an example for operation using command prompt.”net view” is one of the netbios command to view the shared resources of the remote computer.Here “219.64.55.112″ is an IP addressof remote computer that is to be hacked through Netbios.You have to substitute a vlaid IP address in it’s place.If succeeded a list of HARD-DISK DRIVES & PRINTERS are shown.If not an error message is displayed. So repeat the procedure 2 with a different IP address.

3. After succeeding, use the “net use” command in the command prompt.The “net use” is another netbios command which makes it possible to hack remote drives or printers.

Example-1:
C:\>net use D: \\219.64.55.112\F
Example-2:
C:\>net use G: \\219.64.55.112\SharedDocs
Example-3:
C:\>net use I: \\219.64.55.112\Myprint

NOTE: In Examples 1,2 & 3, D:,G: & I: are the Network Drive Names that are to be created on your computer to access remote computer’s hard-disk.

NOTE: GIVE DRIVE NAMES THAT ARE NOT USED BY ANY OTHER DRIVES INCLUDING HARD-DISK DRIVES,FLOPPY DRIVES AND ROM-DRIVES ON YOUR COMPUTER.THAT IS IF YOU HAVE C: & D: AS HARD DIRVES, A: AS FLOPPY DIVE AND E: AS CD-DRIVE, GIVE F: AS YOUR SHARED DRIVE IN THE COMMAND PROMPT

F:,”SharedDocs” are the names of remote computer’s hard-disk’s drives that you want to hack. “Myprint” is the name of remote computer’s printer.These are displayed after giving “net use” command. “219.64.55.112″ is the IP address of remote computer that you want to hack.

4. After succeeding your computer will give a message that “The command completed successfully“. Once you get the above message you are only one step away from hacking the computer.

Now open “My Computer” you will see a new “Hard-Disk drive”(Shared) with the specified name.You can open it and access remote computer’s Hard-Drive.You can copy files,music,folders etc. from victim’s hard-drive.You can delete/modify data on victim’s hard-drive only if WRITE-ACCESS is enabled on victim’s system.You can access files\folders quickly through “Command Prompt”.

NOTE: If Remote Computer’s Firewall Is Enabled Your Computer Will Not Succeed In Gaining Access To Remote Computer Through Netbios.That is Netbios Hacking Is Not Possible In This Situation.(An Error Message Is Displayed).So Repeat The Procedure 2,3 With Different IP Address.

HAPPY NETBOS HACKING!!

Posted in , , , , , , ,

21 comments

Windows XP IP Utilities



The following are the IP utilities available in Windows that help in finding out the information about IP Hosts and domains.These are the basic IP Hacking Commands that everyone must know!

NOTE: The term Host used in this article can also be assumed as aWebsitefor simple understanding purpose.

1. PING

PING is a simple application (command) used to determine whether a host is online and available.PING command sends one or more ICMP Echo messages to a specified host requesting a reply.The receiver (Target Host) responds to this ICMP Echo message and returns it back to the sender.This confirms that the Host is online and available.Otherwise the host is said to be unavailable.

Syntax:
C:>ping gohacking.com

2. TELNET
Telnet command is used to connect to a desired host on a specified port number.For example
Syntax:
C:>telnet yahoo.com 25
C:>telnet yahoo.com

NOTE: The default port number is 23.When the port number is not specified the default number is assumed.
Telnet Hacking is explained in detail in the following post.
How To Send Fake Email

3. NSLOOKUP
Many times we think about finding out the IP address of a given site.Say for example google.com,yahoo.com,microsoft.com etc.But how to do this? For this there are some websites that can be used to find out the IP address of a given site.But in Windows we have an inbuilt tool to do this job for us.It isnslookup.Yes this tool can be used for resolving a given domain name into it’s IP address (determine the IP of a given site name).Not only this it can also be used for reverse IP lookup.That is if the IP address is given it determines the corresponding domain name for that IP address.

Syntax:
C:>nslookup google.com

4. NETSTAT

The netstat command can be used to display the current TCP/IP network connections.For example the following netstat command displays all connections and their corresponding listening port numbers.

Eg: C:>netstat -a

This command can be used to determine the IP address/Host names of all the applications connected to your computer.If a hacker is connected to your system even the hacker’s IP is displayed.So the netstat command can be used to get an idea of all the active connections to a given system.

Posted in , , , ,

20 comments

Hide IP Address – Real ways to hide your IP



Here in this post I will try to give you every possible information to hide the IP address.If you seriously want to hide your IP addressthen this post is for you!

One of the most frequently asked questions by the internet users is How To Hide IP Address ?. Many times it becomes necessary to hide the real IP address for the sake of privacy.For this, I have tried many softwares, proxy servers and many such tools that guaranteed to hide my IP address.But still none of them worked for me. I think most of you have the same experience.Are you fed up with these dummy softwares that fails to hide the real IP address? Then is there any working way to hide the IP address?

YES, you can definitely hide your IP .

Now I’ll come to the heart of the post, which contains the answer to your curious question How to Hide the IP address ? The only solution to hide your IP address is by using a Proxy Server.But Wait! The story doesn’t end here.Even though proxy servers are the only way to hide your IP address, there are several ways of connecting your PC to the proxy server.Before setting up the connection with the proxy servers you must know some information about different types of proxy servers and their uses.

1. Transparent Proxy Server
This type of proxy server identifies itself as a proxy server and also makes the original IP address available through the http headers. These are generally used to speedup the web browsing since thay have a very good ability to cache websites.But they do not conceal the IP of it’s users. It is widely known as transparent proxy because it will expose your real IP address to the web.This type of proxy server does not hide your IP address.

2. Anonymous Proxy Server
This type of proxy server identifies itself as a proxy server, but does not make the original IP address available. This type of proxy server is detectable, but provides reasonable anonymity for most users. This type of proxy server will hide your IP address.

3. Distorting Proxy Server
This type of proxy server identifies itself as a proxy server, but make an incorrect original IP address available through the http headers. This type of proxy server will hide your IP address.

4. High Anonymity Proxy Server ( Elite Proxy)
This type of proxy server does not identify itself as a proxy server and does not make available the original IP address. This type of proxy server will hide your IP address.So this is the best way to mask your IP.

Which Proxy Server is the best to Hide My IP ?

I know, you can answer this question better than me.Obviously High Anonymity Proxy or Elite Proxy is the best to hide your IP.But it’s not easy to get a list of working elite proxies.If you search the Google, you will definitely get tons of proxy list.You’ll get a list of proxies in the following format

IP:Port Number
Eg: 221.90.45.67:8080 (221.90.45.67 is the IP of the proxy server and 8080 is the port number)
But most of them don’t work.Here are some of the problems/risks associated with using free proxies that are available on the internet.

  • Most of them do not work since the proxy servers frequently changes it’s IP/Port number.
  • Even if you find a working proxy server it may be too slow.
  • Your privacy is not guaranteed since all your traffic is routed through the proxy server.
  • The administrators of the proxy servers may steal your valuable information such as passwords,SSN (Social security number),Credit Card details etc.

So with all these being the risks then how to find a Working,fast,Highly Anonymous and secured Proxy servers?

Now I will give a list of softwares that will really hide your IP address.I have tried many such softwares and have found only few of them working perfectly.Here is a list of working IP Hiding softwares that you can try.I have listed them in the order of their popularity

1. Hide The IP

Let’s you choose the country,Type and speed of the proxy.Not so popular but personally I recommend this to the users.

2. Hide My IP

3. Hide IP NG

You can get more informations about these products on their respective homepages.

How to ensure that the IP is hidden ?

Before you hide your IP you can check your real IP by visiting the following site.

WhatIsMyIPAddress.Com

Once you get your real IP, switch on your IP hiding software.Now once again visit the above site and check your IP address.If you see a new IP then this means that your software is doing the right job.Also the above site(Whatismyipaddress.com) is capable of detecting many proxies.If you see the words such as “Suspected proxy server or network sharing device” or similar words then it means that the proxy you are using is not an Elite Proxy.

One Final Word before you leave! Even though Elite proxies are almost undetectable this doesn’t mean that you can escape from online crimes by hiding your IP.There are many proxy detecting services available which detect almost any proxy.So if you involve in any cyber crimes then you will definitely be behind the bars.Using proxy will not help you in this case.

One More thing, It is unsafe to use proxy during e-commerce transactions such as Online banking,Online Credit Card payment etc.So please avoid proxies during these circumstances.


Posted in , , , ,

21 comments

How to Hack Orkut


How To Hack Orkut ???
Google uses a 4 Level Orkut login which makes it difficult to hack Orkut using brute force attack.

Second Level – Google account checks for cookie in the sytem of user
Third Level – Google provides a redirection to the entered User information
Fourth Level – Google doesn’t use conventional php/aspx/asp coding. So it is impossible to hack Orkut using input validation attack!!!

It is not an easy task to hack Orkut by breaking this security! But still some people manages to get access to other’s Orkut accounts. The question concerned is How they do it? Many of them just use simple tricks that fool users and then they themself leak out their password. Here are some points you need to take care of, to protect your Orkut account being hacked.

Common Ways to Hack Orkut

1. Using Keyloggers is one of the Easiest Way to Hack an Orkut (or any other email) password.Keylogger programs can spy on what the user types from the keyboard. If you think that you can just uninstall such programs, you are wrong as they are completely hidden.

A keylogger, sometimes called a keystroke logger, key logger, or system monitor, is a hardware device or small program that monitors each keystroke a user types on a specific computer’s keyboard. Keylogger is the easiest way to hack an Orkut account.

A keylogger program is widely available on the internet. Some of the best ones are listed below

All In One Keylogger

SniperSpy ,

Aobo Mac OS X Keylogger (For Mac User)

A detailed information on Keylogger Hack can be found in my post Hacking an Email Account.

2. Phishing Attack is the most popular way of hacking/stealing other’s password. By using fake login pages it is possible to hack Orkut. Here the users land on a page where they are asked for their login information and they enter their Orkut username and password thinking it to be a real page but actually it is other way round. It submits all the entered details to the creator of the fake login page.

3. Orkut New Features: I have come across a page(fake page) that looks like they are giving the user a choice of selecting new features for orkut with your ID and password, of course!! When the user submit’s his/her Orkut login information through this page, there goes his ID and password mailed to the coder.

4. Community Links: Many times you are provided with a link to a community in a scrap. Read the link carefully, It may be something like http://www.okrut.com/Community.aspx?cmm=22910233 OKRUT notORKUT. This is definitely a trap created by the hacker to hack your Orkut password. Clicking on this link will take you to a fake login page and there you loose up your password.

5. Java script: You must have seen the circulating scraps that asks you to paste this code in your address bar and see what happens! Well sometimes they also leak out your information. Check the code and if you are unsure of what to do, then I recommend not to use it. So be careful, javascripts can even be used to hack Orkut!

6. Primary mail address: If by some means a hacker came to know the password of your Yahoo mail or Gmail, which users normally keeps as their primary mail address in their Orkut account, then hacker can hack Orkut account by simply using USER ID and clicking on ‘forget password’. This way Google will send link to the already hacked primary email ID to change the password of the Orkut account. Hence the email hacker will change your Orkut account’s password. Hence your, Orkut account is hacked too.

So a better thing would be to keep a very unknown or useless email ID of yours as primary email id so that if the hacker clicks on ‘Forgot password’ the password changing link goes to an unknown email id i.e. not known to the hacker. Hence your Orkut account saved.

So, I hope that this post not only teaches you to hack Orkut but also to hack protect your Orkut account.

If you would like to share something, comment here and I will add up here with a credit to your name.

Posted in , , , , , ,

43 comments

Hack Protect your Orkut Account



Most of the people ask me “How to hack an Orkut account” which I have already discussed in my previous post Hacking Orkut. But here I am giving you a detailed information about how to protect your Orkut accounts. As we all know most of the Google services are still in BETA. So,websites like Orkut, powered by Google is not totally secure!Several people feel proud in hacking other user’s account. You do a foolish thing, and next day your account is hacked. This is very sad indeed, but hackers are adding names to their victims list till now.

How can a hacker hack my Orkut account?
The answer to this question is already discussed in my previous post How to Hack Orkut.

But this post is meant for providing some safety measures to prevent your Orkut account from being hacked. There is not much you have to take care of. Just follow the simple steps and never get your orkut account hacked in your life.

1. Never try to login/access your Orkut account from sites other than Orkut.com.

2. Never click on any links from the sources you don’t trust while accessing your Orkut account. (or while accessing any other Google services like Gmail,Blogger etc.)

3. Delete any links on your scrapbook, no matter if a known or unknown person have sent it.

4. Never disclose your orkut login details with anyone.

5. Never ever use Javascripts on Orkut, no matter whatever it claims to do. Get satisfied with the services provided by default! Avoid using third party Scripts which might be malicious.

6. Never get excited to see a site claiming to have 1000 cool orkut tricks for which you have to just log in to your orkut account. Don’t trust that site. That’s a Phishing site.

7. Never tick the box “REMEMBER ME” on the orkut homepage if you are surfing from a cafe or a public area.

8. Always remember to hit Sign out button, when you are done.

Posted in , , , , ,

21 comments
Subscribe to: Posts (Atom)

Interesting Site

Related Posts with Thumbnails
Related Posts with Thumbnails

Display Newer Trick on Facebook